Epoxy floor coatings
Flake Color Options
21 through-colored chip blends in three sizes, for garage, basement, shop and patio floors across Lawrenceville, Johns Creek and metro Atlanta. Shortlist a few here and we'll bring the sample boards to you.
Decorative flake
What the chips actually do
The color in a flake floor comes from vinyl chips — thin, rigid pieces of water-based resin pigmented the whole way through instead of printed on the face. We broadcast them into the wet base coat by hand, so no two slabs land quite the same. They come in 1/16", 1/8" and 1/4", and the size changes the look as much as the color does.
Because the pigment runs through the chip, it can't wear off the high spots or bleach out in the strip of floor that catches sun under the garage door. The blend also breaks the surface up visually, which is the practical argument for it: flake hides tire dust, red clay and the honest imperfections in a slab that a solid color would put a spotlight on.
Every blend on this page is one we can order and install. Screens lie about color, though — your monitor, your phone and your garage lighting will each shift it. Use this as a shortlist, then we'll bring physical sample boards to the estimate so you can see the real thing on your own floor.
Free estimate
Get epoxy floor coatings priced on site
We measure, check drainage and access, put samples on the ground, and hand you a line-item price. No cost, no sales script.
- Licensed & insured
- Free on-site estimates
- Owner on every job site
- Written workmanship warranty
Mon – Fri: 7:00 AM – 6:00 PM
Saturday: 8:00 AM – 2:00 PM
The lineup
Chip blends we install
Tap any blend to see it enlarged. Colors shift from screen to screen, so treat these as a starting point and hold out for the sample boards before you commit.
Signature Blends
The core lineup, running from warm tans and browns through the cool greys most people end up wanting in a garage. These are the blends we install week to week and keep sample boards for in the truck.
Marble Blends
High-contrast blends that set bright flakes against a dark base for a marbled, terrazzo-like read. They look their best across a wide open floor — a basement, showroom or shop — where the pattern has room to move.
Chip size
Size changes the floor as much as color does
The same blend reads completely differently at 1/16" than it does at 1/4". Bigger chips mean more pattern, more texture and more grip; smaller chips mean a tighter, quieter surface.
1/16" Chip
Fine and almost sandy up close, the nearest thing to a quartz or terrazzo look. The subtlest texture of the three, which suits interior rooms and smaller spaces.
1/8" Chip
The one most people land on. Enough movement to hide dirt and slab repairs without shouting, and comfortable barefoot once the top coat is on.
1/4" Chip
Big flakes, obvious pattern and the most grip underfoot. What we reach for in working garages, shops and anywhere that regularly gets wet.
Why flake
What you get out of it
- Pigment runs through the chip, so color can't wear or fade off the surface
- UV-stable under a sunlit garage door or an exposed patio
- Random flake shapes camouflage crack repairs, patches and trowel marks
- Adds real underfoot texture and noticeably better wet traction
- Hides tire dust, red clay and pollen between cleanings
- Costs less than a metallic or ground terrazzo finish
- Mops clean with plain water — no waxing, buffing or resealing
- Blends can be mixed to chase a specific color or match cabinetry
- Damage can be patched in place instead of recoating the whole floor
Where it works
Floors we put flake on
- Attached and detached garages
- Finished basements and home gyms
- Workshops and hobby shops
- Laundry, mud and utility rooms
- Covered patios, porches and breezeways
- Pool decks and outdoor kitchens
- Commercial kitchens and break rooms
- Retail floors and showrooms
- Auto service bays and dealerships
- Restrooms and locker rooms
- Veterinary clinics and kennels
- Warehouse and light manufacturing floors
Not sure which blend suits the room? Tell us what the floor takes day to day — cars, dogs, weights, kids, a welding table — and we'll narrow the list to three before we come out.
Pick a blend with us
Free estimate
Let's pour something you'll be proud of.
Send us a few details about your driveway, patio or floor and we'll come measure it, price it, and show you finish samples — free, with no pressure.
Start your project